1/32 Cl.25 & 16T wagon 3D print builds

[Brian T]

Hi Guys,

Well hopfully this'll be the start of my 1/32 adventure again after a false start a few years back.

I recently aquired an 04 and then a 3D printed Class 25 plus a couple of 16 tonners from a fellow WT member, the later on a bit of whim...!!

Anyhow,i've decided to make an all be it 'slow' start on the 16 tonners first, so one question first; what adhesives are suitable for the materials that these are made with especialy as i want to add a brass floor to the wagons for weight and stiffness..

Cheers,
Brian.

 

[James]

What's the source of these?

 

[Brian T]

Hi James,
These are designed and produced by Simon br Blue..
Not sure if there still avalible as these were printed via shapeways.
Here's a thread of an earlier 25/1 he's done.
Thread '1/32 class 25 3 D print'
It's from 2019...don't seem tk be able to paste in a link ... !!

Brian.

 

[James]

Hi James,
These are designed and produced by Simon br Blue..
Not sure if there still avalible as these were printed via shapeways.
Here's a thread of an earlier 25/1 he's done.
Thread '1/32 class 25 3 D print'
It's from 2019...don't seem tk be able to paste in a link ... !!

Brian.

Thanks Brian, that's why looked familiar!